Sashiko stencils to print and trace

Print a line template at the size of your cloth. Trace it directly on light fabric, or transfer short openings to stencil film for a reusable guide. Leave bridges so the sheet stays in one piece.

Printable layouts

  • Diagonal field

    Two families of diagonals cross a plain block from edge to edge.

    20 × 20 cm

  • Seven treasures

    Interlocking circles share a center line. Match their intersections at the seams.

    20 × 20 cm

  • Hemp leaf block

    Align a six-pointed star with the block center before tracing the adjacent repeats.

    18 × 18 cm

Make a reusable marking stencil

  1. Choose a layout below. Set the panel dimensions and print the PDF at actual size. Measure a grid interval with a ruler.

  2. Tape the print beneath clear stencil film. Mark short slots along the lines. Keep an uncut bridge at corners and along closed shapes so the centers stay attached.

  3. Work on a cutting mat with the film flat and fingers clear of the cutting path. Remove the marked slots and test on scrap with a fabric-safe marker.

  4. Hold the film still, mark through the slots and lift it straight up. Join the breaks with a ruler or a smooth curve before stitching.

Transfer by cloth and use

SituationMethod
Light cloth, one piecePut the print behind the cloth and trace in good light.
Dark cloth, one pieceUse dressmaker’s transfer paper suited to the fabric and test removal.
Repeated panelsUse bridged film and mark a registration point at each edge.

Questions

Should I cut out a whole circle?
Keep bridges around the circle. Cutting a continuous slot lets the center fall out.
Why does the repeat fail to meet at the edge?
Make sure the printer used actual size and align two matching repeat points before tracing the next section.

Related guides