How to sashiko: a step-by-step tutorial

You need cloth, sashiko thread, a long needle and a printed pattern. Here is the whole process in seven steps.

Seven steps

  1. 1. Choose and print a pattern

    Pick a pattern and print a true-scale sheet from the template maker.

  2. 2. Mark it on the cloth

    Trace the lines onto your cloth with a water-soluble pen.

  3. 3. Thread the needle

    Cut one strand of sashiko thread about 1 m long.

  4. 4. Start

    Tie a small knot on the back, or leave a 5 cm tail and weave it in later.

  5. 5. Stitch

    Load 3–5 stitches on the needle before pulling through; stitches 3–6 mm, gaps a little shorter.

  6. 6. Turn corners and crossings

    In a line pattern, leave space where several lines meet. In a hitomezashi cross, let the stitches cross. Leave a little slack on the back at a turn.

  7. 7. Finish and smooth

    End on the back, then stroke the stitched line between your fingers to spread the thread evenly (this is called itokoki).

First patterns to try

What is sashiko?

Sashiko means “little stabs.” Japanese stitchers used rows of running stitches to reinforce work clothes, hold layers together and mend worn cloth. Today the same stitch makes geometric patterns on dish cloths, bags and quilts.

In moyozashi, the needle follows drawn lines. In hitomezashi, short stitches meet on a grid. Kogin stitchers count the threads in the cloth itself.

Compare sashiko and boro

Starter kit checklist

ItemWhat to look forWhat to use instead
Sashiko threadthick, matte cotton, one strandsix strands of embroidery floss
Sashiko needlelong (about 5 cm), sharp, with a large eyea long darning or crewel needle
Thimblea palm thimble to push the needlea leather sewing thimble
Clothloosely woven cotton or linen, about 33 cm square to startan old cotton shirt or tea towel
Marking penwater-soluble or heat-erasabletailor's chalk
Patterntrue-scale printable sheetprint one free

Three ways to start and finish a thread

  1. 1. Start with a small knot on the wrong side

    For single-layer cloth or visible mending where the back stays hidden, tie a small overhand knot at the tail and bring the needle up at the first stitch.

  2. 2. Or start knotless with a 5 cm tail (for hana fukin)

    On double-layer cloths like hana fukin, leave a 5 cm unknotted tail on the wrong side or between the two layers, then weave it back under the first few stitches once the row is done.

  3. 3. Finish by weaving back under 3–4 stitches

    At the end of a thread, run the needle back through 3 or 4 stitches on the wrong side (or tie a tiny knot on single-layer cloth) and trim close.

Questions

How long should sashiko stitches be?
Try a 3 mm dash with a slightly shorter gap on a practice line. Shorten the stitch on a tight curve and keep the cloth flat.
Do I need a thimble?
It helps: a palm thimble lets you push a long needle loaded with several stitches.
Can I use embroidery floss?
Yes. Change the number of strands to suit the cloth. Try a short line first to compare its sheen and coverage.