Bunka embroidery with a punch needle
Bunka shishu is Japanese punch embroidery. A hollow needle feeds rayon bunka yarn into stretched cloth. Short and long surface stitches can follow the shape of a petal or a patch of shading.
Punch a small petal
Fit cloth suited to the needle and yarn tightly in a frame. Leave clear space behind it for the needle tip. Draw a simple petal on the working face.
Pull out the end of the rayon cord as your yarn instructions specify. Thread the tool according to its diagram and give the working yarn room to feed freely.
Punch to a consistent depth. Lift just clear of the surface and slide to the next position so you do not pull the previous stitch free.
Angle successive rows along the petal. Alternate short and long stitches at a color change. Check the reverse for even loops and secure the ends as your kit directs.
Solve common punch problems
| Symptom | Check |
|---|---|
| Stitches pull back out | Free the feeding yarn and keep the lifted tip close to the surface. |
| Hole stays open around a stitch | Match the foundation weave and needle diameter to the yarn. |
| Rows look flat and square | Turn the direction gradually along the petal and stagger the color boundary. |
Questions
- Can I use an ordinary embroidery needle?
- A hand needle can sew rayon stitches, but a bunka punch feeds yarn through its hollow shaft. Choose the tool specified by the design.
- Which side makes the picture?
- Many bunka designs use the flat stitch side for the picture. Some punch work uses the loop side, so check the design before transferring an outline.