Sashiko patch: behind or over
Cut a patch at least 2 cm larger than the damage on every side, pin it flat and stitch across the whole area.
How to apply a sashiko patch
1. Choose behind or over the garment
Put the patch behind the hole when you want the worn garment edge to frame it; fold edges under 5 mm and place the patch on top to cover stains or frayed cuffs.
2. Overlap healthy fabric by at least 2 cm
Always size the patch at least 2 cm wider than the tear or thin spot on all four sides so stitches anchor into strong cloth.
3. Mark a 10 mm grid over the whole patch
Draw square or diamond guidelines with a water-soluble pen or chalk across both the patch and the surrounding garment.
4. Stitch through both layers across the entire area
Work even 3–6 mm running stitches across the full patch—not just around the border—so washing will not pull the mend loose.
Materials
| Material | What to use |
|---|---|
| Patch cloth | Pre-washed cotton, linen or denim matching the weight and wash care of the garment. |
| Thread | Single strand of cotton sashiko thread (4-ply or 6-ply), or 6 strands of embroidery floss. |
| Marking pen & pins | Water-soluble pen or tailor's chalk plus fine pins or basting thread to hold layers flat. |
Related guides
Questions
- Why stitch across the whole patch instead of only the edge?
- Grid stitching binds both cloth layers together evenly so the worn hole cannot sag or tear away from the patch in the wash.
- How do I stop raw edges inside a hole from fraying?
- Trim long loose threads, then run your sashiko stitch lines right across the cut edge to anchor the weave against the backing patch.