Hand sewing patch guide
For a neat outside patch, press the raw edges under, baste the patch on sound fabric and sew around the fold. Add stitches through the middle if the cloth below is worn.
Sew an outside patch
Choose a patch wide enough to cover the weak fabric after its edges are turned. Wash and dry the patch cloth first so it shrinks before sewing.
Fold a narrow hem toward the back of the patch. Trim excess from bulky corners without cutting into the folded edge. Place the patch grain parallel to the garment grain.
Center the patch and baste around it with removable thread. Slip a hand inside the garment and check that a pocket or lining is free.
Whipstitch the folded edge down with small bites, or use a line of running stitch near the fold. Stitch across the middle to connect an underlying hole to the patch.
Choose an edge finish
| Patch | Finish |
|---|---|
| Woven cotton | Turn the edges under and sew through the folds. |
| Non-fraying felt | Leave the edge flat and whipstitch or blanket-stitch around it. |
| Denim work patch | Use a light backing or turned-edge top patch. Avoid stacking thick folds over seams. |
Questions
- Can a decorative patch cover a hole?
- Yes, if it reaches strong fabric and can take the strain. Secure the worn fabric to it so the tear does not keep opening underneath.
- What if the corners curl?
- Press the folds before basting. Catch both folds with a small stitch at each corner and smooth the patch before sewing the next side.