Visible mending ideas for worn clothes

Let the shape of the damage choose the design. Crosses cover a knee, diamonds follow an elbow and narrow repeats fit a pocket edge. Open a swatch to change its size.

Printable layouts

  • Crosses on a knee

    Cross the second pass over the first. Keep both ends of each row in sound denim.

    12 × 15 cm

  • Diamond elbow

    Center a diamond over the point of the elbow. Baste the backing with the sleeve bent.

    10 × 12 cm

  • Ladder along a pocket

    Follow the pocket edge with a narrow stepped border. Keep the opening clear.

    5 × 12 cm

  • Scales at a cuff

    Place a row of triangles inside the folded edge. Work with the cuff open.

    12 × 5 cm

  • Waves over a tear

    Back the rip first. Let the arcs extend into good cloth at both ends.

    14 × 8 cm

  • Squares on a bag base

    Turn the bag inside out to free the lining, then reinforce the bottom with an open grid.

    15 × 15 cm

Fit the pattern to the damage

  1. Hold the garment to light. Include the thin halo in the repair and mark a rectangle on scrap paper.

  2. Open a layout below and set the dimensions to your traced area. Center a large motif or use a small repeat if only part of a motif would fit.

  3. Baste the backing and bend the knee or elbow. Keep rows farther apart where the cloth must drape.

Choose by wear

AreaPlacement
ElbowCenter the patch over the bent elbow, leaving room at the sides.
Pocket edgeKeep the opening free by holding the pocket bag out of the way.
CuffUse a short border repeat and catch loose edge threads to the backing.

Questions

Can I use two thread colors?
Yes. Change thread between rows or directions so ends can be buried on the back.
How do I keep a visible mend soft?
Use a backing similar in weight to the garment. Start with an open repeat and add rows only where the cloth needs support.

Related guides